We have handed over the hall for the robotic milking parlor in Kozojedy

At the end of February 2026, we completed and handed over to the general contractor W&W STAVBY s.r.o. an agricultural hall for a robotic milking parlor with facilities.

For this project, our company supplied the main steel structure. We clad the structure with sandwich panels with a thickness of 100 mm and installed the infills, which include a ridge ventilation slot, glazed sectional doors, sliding doors, and plastic windows with doors.

We also collaborated on the interior equipment of the building for this project. We installed ceilings on the masonry walls. For the milking parlor technology, we supplemented the pre-prepared PREFA structure with steel elements of the gallery, including railings.

During the implementation, we cooperated with the general contractor on the optimization of both masonry and steel parts of the building. During the assembly of the steel structure, it was necessary to coordinate the work process with the already installed prefabricated parts of the robotic milking parlor.

The assembly of the steel structure and roof cladding took 2 weeks in December 2025. At the beginning of 2026, we subsequently completed the wall cladding, infills, and interior fit-out of the hall over 7.5 weeks.

HALL PARAMETERS:

Purpose: Milking Parlor

Dimensions: 27 x 34 m
Eaves height: 4.95 m
Ridge height: 8.57 m

Roof pitch: 15°

Structure:

• Steel structure, color RAL 9002 (grey-white), fire resistance R 15 DP1 
• Purlins – galvanized thin-walled METSEC profiles
• Ceiling beams – galvanized thin-walled METSEC profiles (ceiling of the fit-out)

Metalwork elements:

• Staircase with grating steps
• Ceiling above robots – galvanized structure and gratings between PREFA structure
• Railings for staircase and gallery – hot-dip galvanized

Cladding:

• Roof cladding:  PIR panel thickness 100 mm, fire resistance RE 15 DP3, color RAL 9002 (grey-white)
• Wall cladding: PIR panel width 1000 mm and thickness 100 mm, fire resistance EW/EI 15 DP3, color RAL 9002 (grey-white)
• Ceiling of facilities: PIR panel width 1000 mm and thickness 60 mm, without fire resistance, color RAL 9002 (grey-white)
• Walkable office ceiling – 2× OSB board thickness 25 mm
• Sheet metal elements – RAL 9002 (grey-white)
• Snow guards – RAL 9002 (grey-white)

Infills:

• Plastic windows with insulating double glazing, color RAL 9006 (silver)
  • size 0.6 x 1 m, 4 pcs
  • size 1.5 x 1.5 m, 4 pcs
  • size 2.0 x 1.5 m, 4 pcs
• Plastic doors with lowered threshold, color RAL 9006 (silver), glazing in the upper third
  • size 1.2 x 2.1 m, 1 pc
  • double-leaf size 2.2 x 2.1 m, 1 pc
• Double-leaf ridge ventilation slot, infill polycarbonate 16 mm, electric drive + weather station, size 1.8 x 32 m, 1 pc
• Sectional doors with roof pitch guidance and natural anodized frames, color RAL 9006 (silver)
  • glazing 6 sections, with integrated door, size 4.9 x 4.5 m, 2 pcs
  • glazing 6 sections, size 4.9 x 4.5 m, 2 pcs
  • glazing 5 sections, size 4.9 x 3.0 m, 2 pcs
• Single-leaf sliding door thickness 50 mm, color RAL 9006 (silver), size 4.9 x 4.5 m, 1 pc